Surprisingly easy ways to stop a shaving cut from bleeding

Shaving is a must-do project for men everyday. But sometimes, however careful you maybe, you’re bound to nick your skin while using shaving cream at some point or the other. You maybe in a hurry and then shaving cut would happen sometimes. How to get rid of a shaving cut properly? There are easy and faster remedies for treating wounds and stopping blood for you.

1. Most deodorants or antiperspirants contain aluminium chloride that constrict blood vessels and clot a nick. You can swipe a bit of deodorant on your fingertip or use a cotton swab to apply it to the cut.

2. A spoonful of sugar might just be the need of the hour. Not only will it get the small cut to stop bleeding but also act as a disinfectant, killing bacteria that maybe present around the wound.

3. Simply grab an ice cube and apply it to the cut for the cold will allow the blood vessels to constrict and clot faster. Alternatively, you can also apply a wet washcloth with ice cold water to heal the wound.

4. Mouthwash with halts the blood flow by causing the nearby tissues around the wound to contract. Use hot water can help you cauterize the wound and that will stop the bleeding.

5. Lip balm. Smearing on a little of your girlfriend’s Chap Stick or Vaseline works like a seal – the waxy texture enables clot formation. This will cut stop the bleeding.

6) Dip into some witch hazel and gently apply it to the cut. Witch hazel, like the cold water or ice, will cause the blood vessels to constrict. It can, however, sting when applied, so use it sparingly.

7) Aspirin has many interesting uses and healing the shaving cut is one of them. Dissolve a tablet in water and make a solution and then stick a Q-tip or cotton ball into it and then swab it onto your cut.

8) All men should own a styptic pencil. This little crayon, when wet and rubbed over a shaving nick or cut, can quickly stop the bleeding while contracting tissues to seal the cut. They can be found at a variety of drug stores.

Along with this easy ways to get rig of a shaving cut, the most basic work should be applying shaving foam to shave properly. How to shave properly? You can follow these steps: firstly, trim hair with clippers or scissors if you're starting with a full beard. Wash your face with a facial wash. After this, put a few drops of shaving oil in the palm of your hand and rub it into your beard before applying the shaving cream and start with one side of your face and work steadily towards the other side. Then, rinse your face with warm water and apply a non-alcohol shaving balm. At last, soothe any nicks or small cuts after shaving by drenching your face in cold water.

A successful shaving can offer a clean and impressive outlook for a man if he takes part in a party that night. There are many party supplies wholesale like party string in the market for you to choose from, you can make your best choice! 

One of proper car care guide – wash mitt

With the improvement of the living standard, the buying abilities of people also increase. Nowadays, buying a new car becomes a fashion. However, most new drivers are totally not familiar with how to proper care their news. It is suggested to use a wash mitt to protect your car when washing it.

Many people may have a thought that a new car doesn’t need to do any care on it. To be honesty, this thought is totally wrong. Actually, you may have to pay a lot of attention and money for that car if you want to keep it looking new. A new car is not immune to the harsh environmental elements and the clear coat is not the shield that protects your car. In a word, it needs to be protected.

So how to properly care your new car becomes increasingly important. You have to be more careful and at the same time, choose the proper ways to care your cars. There are some useful tips on proper car care for your reference.

1. Preparations. You should start to choose the appropriate time to start proper car care. It is when you drive home and pull into the driveway. And then get the tools you may need. Such as wash buckets, car wash shampoo, wash mitt, car paint spray and microfiber drying towels.

2. Washing is the basic work of car care and car washing procedure is the number one cause of swirl marks. You have to thoroughly wash your car to remove loose dirt and grime. Make use of a high quality car wash shampoo, and with your wash mitt to avoid scratches when washing. Then use a microfiber drying towels to dry it.

3. Claying your new car. Clean your paint with detailing clay to remove bonded surface contamination that is stuck to the paint and is not removed with normal washing. Claying your car is a process to be done prior to the polishing process to remove surface contaminants that make your paint rough and prepare your car for the polishing and protecting steps.

4. Polishing your new car. You can choose from many kinds of polishes for your new car, such as rubberized paint, chameleon car paint and so on. These can help to protect you car at the same time, supply your favorite colors or styles. You can also use a pre-wax cleaner to enhance the shine and prepare your paint for your paint protecting, sealant or wax.

5. Protecting your new car. New car need to be protecting the paint surface from harsh environmental elements and prevent premature aging with a car wax, car paint or paint sealant. They can do a great job in protecting against and preventing premature deterioration caused by the onset of oxidation.

6. Keep top maintenance for your new car. Check on your car’s fluids regularly and change different fluids in different routines. Be a smart driver and drive your car in a correct way that reduces the damages of your cars when driving. One useful tip is to apply a car air freshener to keep the fresh smell for your new car. 

Car care is a work needs most carefulness and attention. But some people are doing it in wrong ways. There are 4 common car care mistakes that many people commit.

The first mistake is that they may ignore bad wipers. A set of new wipers is a small cost in comparison to the cost of insurance deductible when they hit something that couldn’t see.

The second mistake is that using a dirty air filter. Dirty air filters can not only hurt fuel economy, but put a stranglehold on car’s air supply that making engine works that much harder.

The third mistake that most people commit is not using a gas cap. The gas cap is a critical part of the ventilation system and is one of the most common reasons the engine light goes on.

The last mistake is that the usage of wrong tools in car care. Most people don’t care much of the things they apply to their cars. It is suggest that you should use the right car wash shampoo, wash mitt and car paint spray for your car.

Besides all these tips, you can apply rubberized paint for your car. You have to learn more professional tips on how to apply it before hand. All things are difficult before they are easy. But if you make full preparation before starting, you can get twice the result with half of the effort.